TriggerShims.Com

10/22 Parts

Manufacturer of
Trigger Shims Brand
American Made Gun Shims

God Bless the U.S.A.

RUGER 10/22 RIFLE TUNE-UP PAK - All Models

without recoil spring

Ruger 10/22 Standard Recoil Spring

Pak Contains One Factory Standard Recoil Spring
For the .22 LR ONLY.
Stock No. 32342.....$15.95

Please Note: The Recoil Spring on the 10/22 is Held
Captively on the Guide Rod. Gunsmith Installation
is Recommended, or use with a Power Custom Guide Rod.
Made in the U.S.A.

Wolff 32342 $15.95 Free USA Shipping

Ruger 10/22 Extra Power Recoil Spring

Pak Contains One Extra Power Recoil Spring
For the .22 LR ONLY.
Stock No. 32341.....$15.95

Please Note: The Recoil Spring on the 10/22 is Held
Captively on the Guide Rod. Gunsmith Installation
is Recommended, or use with a Power Custom Guide Rod.
Made in the U.S.A.

Wolff 32341 $15.95 Free USA Shipping

Ruger 10/22 Rifle
B-16 Extractor Plunger - $9.95
B-15 Plunger Spring - $7.95
Set of Both Parts - $14.95

Genuine Ruger B-16 Plunger

Genuine or Wolff B-15 Plunger Spring
(depending on availability)
Price Includes Free Shipping w/ Tracking

B-16 Plunger / B-15 Spring / 16/15 Set B-16 Plunger $9.95 USDB-15 Spring $7.95 USDB-16/15 Plunger/Spring Set $14.95 USD

TriggerShims Ruger 10/22 Oversize Pin Paks

Ruger 10/22 Oversize Trigger / Hammer 3 Pin Pak

Slightly Oversize - Better Fit
416 Stainless Steel - Made in the USA
Meets Military Specifications

My Trigger Pin set includes 1 each - 5/32" Hammer Pin, 1/8" Trigger Pin, and 3/32" Disconnector Pin.
All 3 pins are Precision Ground Slightly Oversize* as opposed to the slightly undersize pins supplied by Ruger.
Will fit 99% of all stock Ruger Trigger Assemblies with a tighter fit.
These pins are sourced only from one of the very best suppliers in the U.S. and come with my 100% Satisfaction Guarantee on both Quality and Fit.
Note: Some Aftermarket Trigger Parts with very close tolerances may require you to polish pin down to fit.
*These pins are .0001" to .0003" (ten-thousandths) over nominal sizes listed above.

3 Piece Pak includes 1 Hammer Pin (B19), 1 Trigger Pin (B21) and 1 Disconnector Pin (KE02800)

* Ruger Stock Numbers for Reference Only

10/22 O.S. Pin Pak #OSPP $9.95 Free USA Shipping

Magazine Latch Pivot / Ejector Pin B35

Slightly Oversize - Better Fit

Precision Ground Slightly Oversize* as opposed to the slightly undersize pins supplied by Ruger.
Will fit 99% of all stock Ruger Trigger Assemblies with a tighter fit.

This pin is a nominal 1/8" and 9/10 inch in length
(*B35) Shorter of two pins is for the Magazine Latch, and Longer of two pins is for Ejector

Sold in a set of Two Pins
10/22 B35 O.S. Pin Pak #B35PP $7.95 Free USA Shipping

Ruger 10/22 5 Piece Oversize Pin Pak

5 Piece Pak includes 1 Hammer Pin (B19), 1 Trigger Pin (B21) and 1 Disconnector Pin (KE02800)
and 2 (B35) Magazine Latch Pivot / Ejector Pins
(*B35) Shorter of two pins is for the Magazine Latch, and Longer of two pins is for Ejector

10/22 5 Piece O.S. Pin Pak #5OSPP $14.95 Free USA Shipping

Ruger 10/22 Oversize Cross Pin

Slightly Oversize - Better Fit

My Cross Pin set includes (two) - 3/16" Cross Pins. (.1875")
These pins are Precision Ground (very) Slightly Oversize* as opposed to the slightly undersize pins supplied by Ruger.
*These pins are .0001" to .0003" (ten-thousandths) over nominal sizes listed above.
2 Piece Cross Pin Pak Ruger # B5 *Ruger Stock Numbers for Reference Only

10/22 Cross Pin Pak #B5CPP $9.95 Free USA Shipping

TECH TIP: Pins

The pins included in your Ruger Trigger Assembly serve the purpose, but some leave something to be desired when upgrading your Trigger Assembly for best performance. Stock Pins are not always exactly round and sometimes are somewhat undersized, but our Ground Stainless Steel pins are an easy-to-install improvement.
The Stock Ruger Pins in my Rifle were anywhere from .0002" to .002" undersize and out-of-round with a less than ideal finish.
These pins are approximately .0003" (Note: that is Three TEN Thousandths) over nominal size and ground perfectly round.

On a regular dial caliper, .0003" would show up as about one width of the needle indicator.
By installing the Ground Stainless Oversize Pin Pak in my 10/22T which has a Power Custom Hammer and Adjustable Sear Kit I measured over 1/2 pound additional improvement in Trigger Pull.

Made in the USA then Custom Ground to Length by me at TriggerShims, these pins are ready to install.

Your Satisfaction is Guaranteed 100% or Your Money Back!

Hello Lance, I purchased the hammer and shim kit from you late last year and with the holidays I didn't get it installed until today. I can't tell you how pleased I am with it. The trigger is smooth as silk and the shims have taken all of the play out of the trigger.
I have tried the Ruger BX25 trigger and it isn't as nice. While it's trigger pull is light there is play in trigger. I don't have a tool to measure the trigger pull, I really don't need it. The trigger just feels better.
Thank you for selling a fine product at a fair price and the individual service that you provided. Hope you and Tammy are doing well.
Regards, Joe in AL

Ruger 10/22 Complete Gun Guide

The only current printed manual that includes information on ALL models from 1964 ~ 2014.
Includes all serial numbers and manufacture dates for all models from 1964 ~ 2014!
Easy to use -- Comb binding lies open and flat on your work surface. Parts Diagram Drawings, Field Stripping and Full Disassembly Instructions including
Hammer and Trigger Assembly, Very Helpful when installing a Trigger Shim Kit.
67 pages & 106 high-resolution grayscale images.
Cardstock cover. Bright white paper.
Makes a Very Nice Gift, No 10/22 Owner Should be Without This Guide!

TECH TIP: Target Ammo

This is the ammo I use and recommend

Wolf High-Performance Target Loads
Five round groups in one ragged hole are possible with this ammo at 50 yards benchrest, as I have done it.
It may not be as consistent as the $15 a box stuff, but it fits my pocketbook when I want to make holes in paper!
Wolf 22 LR target ammunition is loaded with VihtaVuori powder prized by centerfire benchrest shooters for its consistent burn rates. The high-quality brass is formed using a proprietary manufacturing technique that maintains outstanding round-to-round consistency to help deliver consistent pressures and superb accuracy.
This ammo is sold and shipped through Brownell's - click the picture to go to Brownell's Wolff Ammo Page.

Shipping/Mail Upgrades/Tracking Information

---

We Cheerfully accept Cash, Money Order, and Credit Cards through our Secure PayPal Check-Out

All Website Orders are Shipped the Next Business Day

I will Ship Shims to USA, Canada and International

Gun Parts Shipped to USA Only

"American Made Gun Shims" - GunShims.com - TriggerShims.com
and
TriggerShims is a Trademark
of
Shively Sales
Michigan Center, Michigan

Copyright 2008 ~ 2020

God Bless America!

BY PURCHASING SHIVELY SALES PRODUCTS
YOU ASSUME ALL RESPONSIBILITY FOR THEIR SAFE INSTALLATION AND USAGE.
YOU RETAIN ANY AND ALL RESPONSIBILITY FOR YOUR OWN ACTIONS. Be Safe!!

If you have any questions or safety concerns, see a qualified Gunsmith.

Website Problems contact Webmaster@TriggerShims.com