Menck Bolt Tool

Step-by-Step Instructions – How to Use the Menck Bolt Tool

Important Safety Notes
Always work on an unloaded rifle with the bolt removed.
Wear eye protection.
Keep the tool, bolt, and parts pointed in a safe direction.
If you are unsure, consult a qualified gunsmith.

Tools Needed

• Menck Bolt Tool
• Punch or small drift pin (for the cross pin)
• Hammer
• Cleaning supplies and new striker spring (optional)

Step-by-Step Directions

1. Remove the Bolt from your rifle and place it on a clean, stable surface.
2. Select the Correct End
   Use the Remington-shaped end for Remington 600/700/7/XP-100 bolts.
   Use the Ruger-shaped end for Ruger M77, 77/22, 77/17, etc.
3. Position the Tool
   Slide the proper end of the Menck Tool over the rear of the bolt shroud until it seats firmly.
4. Insert the Ruger Spacer (if needed)
   For most Ruger 77/22 and 77/17 models, insert the supplied 2" hardwood dowel inside the bolt to properly support the firing pin assembly.
5. Compress the Striker Spring
   Turn the center screw (cross handle) clockwise. This smoothly compresses the striker spring and moves the firing pin forward.
6. Remove the Cross Pin
   While the spring is compressed, use a punch to drive out the small cross pin that retains the firing pin. Catch the parts as they become loose.
7. Release and Remove Parts
   Slowly back out the screw to release spring tension. Remove the firing pin, spring, and any other components for cleaning or replacement.
8. Reassembly
   Install the new striker spring (and firing pin). Re-compress with the Menck Tool, align the cross pin holes, and reinstall the cross pin. Slowly release the tool.

Tip: The tool makes changing to a lighter striker spring (such as our Wolff Blitzschnell springs) quick and safe.

Menck Bolt Tool Mechanics – Simple Explanation

The Menck Bolt Tool is a specialized compression tool designed to make bolt disassembly and striker (firing pin) spring replacement safe and easy on Remington and Ruger bolt-action rifles.

How It Works (Step-by-Step)

1. Dual-End Design
   The tool has two different working ends on one steel body:
   • One end fits Remington 600 / 700 / 7 / XP-100 bolts.
   • The other end fits Ruger M77 and 77/22-series bolts.
2. Compression Mechanism
   • You slip the correct end of the tool over the rear of the bolt shroud (the knurled or threaded end where the bolt handle attaches).
   • The tool’s cup or shoulder rests firmly against the bolt shroud.
   • The center screw (with the cross handle) pushes directly against the rear of the firing pin / striker.
3. What Happens When You Turn the Handle
   Turning the handle advances the screw, which smoothly compresses the powerful striker spring. This pushes the firing pin forward just enough so the cross pin (the small pin that holds the firing pin in place) can be punched out safely.
4. Why It’s Needed
   Striker springs in these rifles are very strong. Without the tool, you would need to fight the spring tension with improvised methods (vise, pliers, etc.), which risks damaging the firing pin tip, scratching the bolt, or launching parts across the room.
5. Ruger Bonus Feature
   The tool comes with a small hardwood dowel spacer. For many Ruger 77/22 and similar models, you insert the dowel inside the bolt to help position everything correctly while compressing.

Summary of Safety & Benefit

The tool gives you controlled, hands-free compression so you can:

• Drive out the retaining cross pin safely.
• Remove the firing pin and old spring.
• Install a new striker spring.
• Reassemble without damage or frustration.

It turns a difficult, risky job into a quick, routine maintenance task.

#SHIP-V2.2

UPGRADE FROM FREE ECONOMY SHIPPING ~to~ TRACKING w/ SHIPPING PROTECTION #ESU

(USA Only) Orders - Add TRACKING $6.00

NOTE: Free Shipping Shim orders DO NOT include Tracking!
Shims are sent via White Envelope Snail Mail - Ground - No Insurance

If you want Tracking Upgrade, this is the place.

~Click the ADD TO CART button below ANYTIME BEFORE WE SHIP ~

Tracking and Replacement for Items Lost or Damaged During Shipping

Please Do Not Duplicate Your Order to Add This Upgrade

Continental USA, AK & HI ONLY
* USPS Ground Advantageâ„¢ Service
* Replacement for items lost or damaged during shipping
* You will receive an Email when we ship from PayPal with Tracking

~Click Here~ for U.S. PRIORITY Mail

👉Link To: ADD USPS TRACKING UPGRADE with SHIPPING PROTECTION

👉Link To: INTERNATIONAL TERMS / POSTAGE ~ Add to Cart

"American Made Gun Shims" - GunShims.com - TriggerShims.com
and
TriggerShims is a Trademark
of
Shively Sales
Michigan Center, Michigan

All Material Copyright of Lance Shively
2008 ~ 2026

God Bless and Make America Great Again!

BY PURCHASING SHIVELY SALES PRODUCTS
YOU ASSUME ALL RESPONSIBILITY FOR THEIR SAFE INSTALLATION AND USAGE.
YOU RETAIN ANY AND ALL RESPONSIBILITY FOR YOUR OWN ACTIONS. Be Safe!!

If you have any questions or safety concerns, see a qualified Gunsmith.

I manage this site myself, Please Report Any Website Problems to;
Lance at Webmaster@TriggerShims.com

I Reserve the Right to Refuse Service to Anyone

Republic.... I like the sound of the word. It means people can live free, talk free, go or come, buy or sell, be drunk or sober, however they choose. Some words give you a feeling. Republic is one of those words that makes me tight in the throat - the same tightness a man gets when his baby takes his first step or his first baby shaves and makes his first sound as a man. Some words can give you a feeling that makes your heart warm. Republic is one of those words. - John Wayne in the Alamo